All Shipping Is Included In The Price Within The Continental United States Only. We Ship Motorcycle Lifts Just About Everywhere It Just Costs A Little More!!!
 Completely Portable Motorcycle Lift, Stand It Up & Store It In A Very Small Space App. 18” X 24” |
Kendon Motorcycle Lift(s) For Cruisers, Choppers &
Sport Bikes!! No Space, No Problem! This Is A Powder Coated Heavy Duty Motorcycle Lift, Perfect For The Shop Or Home That Can Be Positioned To Three Different Heights!! |
These Air-Over-Hydraulic Kendon Motorcycle Lifts Have A Capacity For 1000
LB For Either The Cruiser, Or Chopper Models, Or 600 LB Capacity On The
Buell/Sport Bike Model. The Chopper Model Handles Bikes To Max 120"
Wheel Base!! Allow 20 Working Days For Truck Delivery On This Kendon Motorcycle Lift!! |
$649.00
$629.00
$679.00 (Shipping On These Motorcycle Lifts Is Already Included In The Price For The Continental U.S.) |
|
 |
Hydraulic Rolling Motorcycle Jack!!
1500 lb. capacity |
Working height on this motorcycle jack is: 4-5/8'' to 14-1/4'', Overall dimensions: 30-1/8'' L x 14-1/4'' W x 4-5/8'' H |
$139.00 For This Motorcycle Jack Shipped To Your
Door!! |
 |
 |
Rollastand Motorcycle Stand Is For Cleaning Wheels, Or Any Project That Requires You To Be Able To Easily Turn The Wheel With The Bike On Its Kickstand!! | Just Roll The Front Or Rear Wheel Onto The Stand For Easy Cleaning! Designed For Motorcycles Without A Center Stand. Made From Billet Aluminum, Then Powder Coated Black, It Features Sealed Bearings & A Non-Slip Base. |
$75.00 For This Motorcycle Stand Shipped To Your
Door!! |
|
 |
Single Cross-Member Motorcycle Lift!! Lift Either Front Or Rear Wheel, A No-Nonsense, Shop Made Motorcycle Lift. The LAST Motorcycle Stand You Will EVER Need!! |
This Motorcycle Lift Fits Sport Bike to Full Touring Motorcycles |
$99.00
Shipped To Your Door!!! (Steel Has Gone Up, & Will Continue To Go Up In Price!! Get Your Motorcycle Lift Before The Price Increases (again)!!) |
Out Of Stock!! |
 See The Double Motorcycle Lift In Action!! This Motorcycle Stand is out of Stock!! |
Double Cross-Bar Motorcycle Lift!! Raises Both Wheels Off The Ground!! A No-Nonsense, Shop Made Motorcycle Lift. The LAST Motorcycle Stand You Will EVER Need!! |
 This Motorcycle Lift Fits Sport Bikes to Full Touring Motorcycles Read What They Fit, And How To Check Below In The Descriptions!! |
 $129.00 Shipped To Your door!!! (Includes Shipping In The Continental U.S.) |
This Motorcycle Stand is out of Stock!! |
Motorcycle Lift, Bike Lifts, Stands Or A Jack Stand, Whatever You Wish To Call Them, You Must Have One, To Lift Your Bike Up Easily To Work On It!! These Custom Stands Are Extremely Stable, And Require Almost No Effort To Set Your Bike On Our Motorcycle Lift!!
Lifts Almost All Harley Davidson (Except Dyna, No Clear Area), And Most Imports, All It Takes Is A Clear Exposure To TWO Frame Rails Under The Motorcycle, For The Bike Jack Stand To Support The Frame!! Check Your Bike By Looking At The Bottom, If There Are No Engine/Transmission, or Other Stuff Sticking Out Lower Than The Two Frame Rails, Then This Lift Will Work For Your Bike!!
We Make These Stands In Our Shop, They Are So Simple To Use, You Will Toss Your Old Lift. We Price These Motorcycle Lifts To Be Very Competitive, And Sell LOTS of Them!! Everyone Claims They Are The Best Investment For A Stand On The Motorcycle Lift Market Today!! If You Race, Or Just Need To Change Your Oil, This Motorcycle Stand Is Perfect For The Track, Or Home Use.
Another No Non-Sense Shop Made Motorcycle Lift, That Can Handle Sport, To Full Dress Touring Motorcycles!!
Cross Bar Is Made From 3/4" Iron Steel Tubing, Welded To 1 1/2" Steel Strap. The Lift Handle Is Constructed Using 1" Square Steel Material, It Easily Withstands The Daily Rigors Of Shop Use. This Stand Folds Down To Less Than 1.5" Tall & The Extended Handle Stores In The Stand. At Home, Behind The Seat Of Your Pickup, Or Under Your Workbench!!
There Are No Hydraulics To Buy, No Pumps To Pump, Just Slide The Single Crossbar Motorcycle Lift Under Either Side Of Your Bike, And With Very Little Effort, And "No Strain", You Can Lift Either Of Your Bike Wheels Off The Floor!! Position The Motorcycle Lift In The Lower Front Of The Frame To Lift The Front Wheel Clear Of The Ground, Or Position The Motorcycle Lift Closer To The Rear, And Lift The Rear Tire Clear!!
Lifts All Harley Davidson, And Most Imports!!
Yet Another, Custom Designed, And Over Years Redesigned Shop Made Tejas Thump Cycles Motorcycle Lift, This Stand Can Handle Sport, To Full Dress Touring Bikes, And Will Completely Lift Your Harley (Except Dyna, No Clear Area) Or Custom Off The Floor, See The Double Motorcycle Lift In Action!!
Cross Bars Are Made From 3/4" Iron Steel Tubing, Welded To 1 1/2" Steel Strap. The Motorcycle Lift Handle Is Constructed Using 1" Square Steel Material, It Easily Takes The Daily Rigors Of Shop Use. This Stand Folds Down To Less Than 3 3/4" Tall. At Home, Behind The Seat Of Your Pickup, Or Under Your Workbench, This Motorcycle Lift Is A MUST Have!!
There Are No Hydraulics To Buy, No Pumps To Pump, Just Slide The Double Lift Custom Motorcycle Lift/Stand Under Either Side Of Your Bike, And With Very Little Effort, And "No Strain", Your Bike's Wheels Are Off The Floor!!
Copyright 2007
TTC-Motorcycle Parts