1 NIB TIMKEN LM501314 TAPERED ROLLER BEARING CUP OD:2-29/32", CUP W: 0.6537"

Shape:Flanged Pilot Type; Flange Shape:Compact Type; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):77; Number of Bearings:Double; Type:Bearings with Housin; Bearing I.D. d(mm):20; Bearing Retained:Yes (with retaining; Volume Discount:Available; Bearing Part Number:6004;

H1:28.6 mm; A1:50.8 mm; d:57.15 mm; T max.:100 °C; C0:32.8 kN; Recommended tightening torque for set screw:16.8 Nm; Weight:5.37 kg; L:245 mm; H:68.3 mm; Designation of housing:PLE212N-;

B:17; Basic Load Rating, Dynamic Rating(N):23200; Outer Ring:With Outer Ring; Outer Ring Type:Flat; Size Standards:Metric System; Raceway Ring Shape:Needle Roller; Inner/Outer Ring Material:Steel; Specifications/Environment:Standard; d:22; Rolling Element Material:Steel;

da max:39 mm; Da min:55 mm; a:18.6 mm; d1:52.4 mm; Characteristic cage frequency, FTF:0.42 Hz; Rating life coefficient, A2:1; Mass:0.39 kg; r1a max:1.5 mm; db min:38.5 mm; Min operating temperature, Tmin:-40 °C;

Bearing I.D. d(mm):20; Number of Bearings:Double; Flange Shape:Round Type; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6204; Width T(mm):45 ～ 50; Number of Bearings:Double; Seals:VV (Non-Contact Rubb; Bearing Retained:No;

N1:24.5 mm; s1:19.05 mm; H1:14.5 mm; d:30.16 mm; Designation of open end cover:SCOU206-19; A:41.5 mm; B:38.1 mm; C:19.5 kN; G:M6x1; C0:11.2 kN;

Holder Surface Treatment:Electroless Nickel P; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Flange Shape:Compact Type; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):41; Type:Bearings with Housin; Shape:Flanged Pilot Type; Seals:DD (Contact Rubber S; RoHS:6;

H1:28.6 mm; A1:50.8 mm; d:57.15 mm; T max.:100 °C; C0:32.8 kN; Recommended tightening torque for set screw:16.8 Nm; Weight:5.37 kg; L:245 mm; H:68.3 mm; Designation of housing:PLE212N-;

L:135 mm; s1:36.55 mm; T min.:-20 °C; B:38.1 mm; Designation of housing:F307-; Weight:2.16 kg; A1:16 mm; C0:19.2 kN; e:20 mm; A:36 mm;

Holder Surface Treatment:Electroless Nickel P; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Flange Shape:Compact Type; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):41; Type:Bearings with Housin; Shape:Flanged Pilot Type; Seals:DD (Contact Rubber S; RoHS:6;

Bearing I.D. d(mm):20; Number of Bearings:Double; Flange Shape:Round Type; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6204; Width T(mm):45 ～ 50; Number of Bearings:Double; Seals:VV (Non-Contact Rubb; Bearing Retained:No;

L:135 mm; s1:36.55 mm; T min.:-20 °C; B:38.1 mm; Designation of housing:F307-; Weight:2.16 kg; A1:16 mm; C0:19.2 kN; e:20 mm; A:36 mm;

G:M6x1; A:66 mm; Z:26.8 mm; d:50.8 mm; E:25 mm; S:11.8 mm; H1:14 mm; C0:29.2 kN; Recommended tightening torque for set screw:8 Nm; L1:47 mm;

Number of Bearings:Double; Bearing Retained:Yes (with retaining; Housing Material:1045 Carbon Steel; Width T(mm):25 ～ 50; Bearing Part Number:608; Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):45;

G:M6x1; A:66 mm; Z:26.8 mm; d:50.8 mm; E:25 mm; S:11.8 mm; H1:14 mm; C0:29.2 kN; Recommended tightening torque for set screw:8 Nm; L1:47 mm;